DRAGINO LORA SHIELD (433 MHZ) – RFM98 (SX1278) LONG-RANGE RADIO TRANSCEIVER

The Dragino LoRa Shield (433 MHz) – RFM98 (SX1278) Long-Range Radio Transceiver is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.

The Lora Shield based on HopeRF RFM98W (SX1278) (433MHz) targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

Using Semtech’s patented LoRaTM modulation technique the Lora Shield can achieve a sensitivity of over -148dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness. LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.

These devices also support high performance (G)FSK modes for systems including WMBus, IEEE802.15.4g. The Lora Shield deliver exceptional phase noise, selectivity, receiver linearity and IIP3 for significantly lower current consumption than competing devices.

Features / Specifications

168 dB maximum link budget.
+20 dBm – 100 mW constant RF output vs.
+14 dBm high efficiency PA.
Programmable bit rate up to 300 kbps.
High sensitivity: down to -148 dBm.
Bullet-proof front end: IIP3 = -12.5 dBm.
Excellent blocking immunity.
Low RX current of 10.3 mA, 200 nA register retention.
Fully integrated synthesizer with a resolution of 61 Hz.
FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
Built-in bit synchronizer for clock recovery.
Preamble detection.
127 dB Dynamic Range RSSI.
Automatic RF Sense and CAD with ultra-fast AFC.
Packet engine up to 256 bytes with CRC.
Built-in temperature sensor and low battery indicator.
Additional Features

Compatible with 3.3v or 5v I/O Arduino Board.
Frequency Band: 915 MHZ/868 MHZ/433 MHZ (Pre-configure in factory)
Low power consumption
Compatible with Arduino Leonardo, Uno, Mega, DUE
External Antenna via I-Pex connector

(Tutorials can found on our website)

SKU: WL-014


Contact us at 0933.124.7932 or visit us on our store,
Room A1 , Ground Floor, TanKim Bldg,80-Tres Borces St., Mabolo,Cebu City, Philippines 6000


You may also chat us on our Facebook account : https://facebook.com/BitstocElectronics
or send us email on [email protected] or for engineering concerns on the [email protected]


Our store is open from 10am to 4pm, Monday to Friday and on Saturday, 1pm to 4pm only.


Looking forward for your inquiries. Thank you!!!