09262179860 8875638
Metro Manila
CHINA MADE
We are one of the largest free online selling communities with thousands of active sellers.
Do you have something to sell? Your next sale might be just a few clicks away.
Based from 898 member feedbacks. We value your suggestions and use it.
FEATURES:
*12 Heads high intensity magnetic grinding and polishing heads
* Quick and easy to changeable heads
* Speed control from 0~1800rpm
* with display monitor
* Tough and Durable
MODEL: 12T-600
VOLTAGE: 220vAC
CURRENT:10.5AMP/NOLOAD
WATTAGE: 7.5KW
WORKING DEPTH: 1- 3MM
WATER TANK CAPACITY: 68L
GRINDING HEAD (SOLD SEPERATELY): 12 PIECES
GRINDING PLATES: 4 PIECES
WEIGHT: 230KG
OPERATION
1. Press the start button to start the machine while working
2. Slowly rotate the speed control knob to adjust to the required construction speed and enter the normal grinding state.
3. If you encounter and emergency, immediately press the red brake button and the machine will stop working immediately.
4. After the grinding is finished, unplug the power plug after the machine is stopped
5. When starting and stopping work, the operator must protect the machine and keep moving the machine at a constant speed. It must not be ground in place to avoid damage to grinding disc. The machine heats up sharply and the floor is severely burned.
6. Avoid protrusions on the ground,such as steel bars.
MAINTENANCE
1. For 2 hours of continuous work, you should take a break
2. After one working day, you should do cleaning and maintenance. Remove the mud and dust on the machine, especially the grinding disc. Use the air gun or water gun to flush the bottom. Do not flush the electrical parts with the high pressure water gun.
3. For 12 months of continuous or intermittent use, the gear oil must be replaced.
4. Always check the condition of the grinding disc and the grinding disc, and find that is damaged or worn out in time. When the grinding disc is replaced, it is better to replace all the grinding disc at the same time, so as not to affect the quality of the floor.
5. When the machine is not in use, it can be cleaned and stored in the room, and should not be stacked outdoors, so that motor of the grinder is kept away from dust and impact.
Visit us At: CEAD Bldg Filipinas Ave UPS 5 Brgy San Isidro sucat paranaque
Mobile: 09556285391, 09100949365
Telephone: 8 887-5638
This seller has been a member since: Dec. 02, 2017
Member Location:
Total Classifieds: 35
Why seller feedback is important?
Transact with most credible & reputable sellers
Know the seller you are going to deal with
Claim warranty long after purchasing the item
Warn you and other buyers against scams
Motivates sellers to provide good service