CABLE CONTROL CABLE AND PLUG REINFORCEMENT KIT.

Cable Control CABLE and PLUG REINFORCEMENT KIT.


Price:
PhP150 per kit

Each kit contains:

1 pc. 8mm X 6 inches (most 3.5mm audio plugs, micro usb’s, type c chargers, most android chargers)
1 pc. 12mm X 6 inches (most usb’s, most RCA audio plugs)
1 pc. 16mm X 6 inches (some bigger RCA audio plugs, 1’4” audio plug)
1 pc. 24mm X 6 inches (power plugs, some laptop charger plugs)

Shrinkage (inner diameter):
8mm can shrink down to 2mm
12mm can shrink down to 3mm
16mm can shrink down to 4mm
24mm can shrink down to 6mm

For faster reply :
please pm us at : The Garage Manila International?

call / text : 09424 909 323
Location : QC
We Can ship nationwide

Cable Control’s new 4:1 thick dual wall heat shrink tubes make it easy to repair or reinforce flimsy cables and plugs, a perennial problem in today’s electronic world.

To use:
1. Simply choose appropriate-sized shrink tube from the kit.
2. Cut to desired length.
3. Position shrink tube on cable or plug then apply heat from a heat gun. A lighter may be used but do exercise caution so as not to damage the cable or plug.
4. All done!

Each kit contains:
1 pc. 8mm X 6 inches (most 3.5mm audio plugs, micro usb’s, type c chargers, most android chargers)
1 pc. 12mm X 6 inches (most usb’s, most RCA audio plugs)
1 pc. 16mm X 6 inches (some bigger RCA audio plugs, 1’4” audio plug)
1 pc. 24mm X 6 inches (power plugs, some laptop charger plugs)

Price:
PhP150 per kit

Important Notes:
-Available only in black.
-Practice caution when using a heat gun or open flame. Allow shrink tube to cool down before handling.
-Some adhesive may flow out during heating. Simply clean off after cooling down.
-Shrink tube will set in a semi-rigid state once cooled down, giving limited flex. -Adhesive will create a waterproof, dust-proof shell around cable / plug .
-Please leave some allowance in length as tube will shorten slightly after heating.


-For tight squeezes , a little bit of lubricant may be used such as dishwashing liquid or shampoo just to help the shrink tube slide in to the plugs . make sure to use just a small amount. This can be applied with a cotton bud inside the shrink tubes