PHP 100.00 DIY 2.5V LIMIT PLATE CARS START CAPACITOR PROTECTION BOARD PART

DIY 2.5v limit plate cars start capacitor protection board parts

Details:
Car starts with a super capacitor generally consists of six components 15v start module, generally more than 2.7v super capacitor will make electrolyte leakage, resulting in damage to the capacitor. Each is equipped with a protective plate capacitor, can effectively protect each section capacitor voltage does not exceed the limit.


Technical parameters:
I. High-precision voltage regulator IC basis, for the default regulator 2.5v ± 50mV (you can adjust R4, R5 resistance adjustment pressure limiting size)

Two high-power switch, three 2010 chip resistors in parallel into a 0.4 ohm resistor shunt currents up to 5A (considering heat problems, sustained pressure limiting current should not exceed 1A).

Three. Protective plate of two sizes:

(1) diameter 35mm, mounting hole diameter 5.8mm, two-hole center distance 12.5mm, pad diameter 10mm. (In line 600 ---- 700F super capacitor specifications)

(2) diameter 40mm, mounting hole diameter 6mm, two-hole center distance 17mm, pad diameter 12mm. (1400F 2000F ultra capacitor meet specifications)

Four: power tube and back large copper resistance, improved heat dissipation, more stable operation.

Hint: start within the car super capacitor bank voltage 15v can be achieved, although the battery voltage is 12v, but the vehicle has been launched after the battery charge when the battery voltage is higher than 14v, (say six 2.5v restriction plate can reach 15v, 2.2v limit plate will need 7 would be appropriate)

Package Includes:
1 set DIY 2.5v limit plate cars start capacitor protection board parts

Note:
431 is the Q1
2TY is the IC
R1 small resistor
R4 shorted
R5 as is






*****SERIOUS BUYERS ONLY PLEASE*****


Contact number: 09333-888-611

Do payment first before your item would be shipped on that schedule date. NO COD option.

Mode of payment is either thru GCASH, BPI, LBC or PALAWAN Express, PAYPAL(+4.5%+15), CASH for meetups.

Provincial buyers, you'll pay for the added shipping cost:

Via LBC: Starting Oct 15,2018 LBC rates up (till 1 Kilo weight)
165.00 (Metro Cebu)
200.00 (Visayas)
200.00 (Metro Manila)
215.00 (Luzon/Mindanao)
+ 5php insurance for every 500 declared value.

Via JRS: Letter pouch till 100 grams (now compulsory insurance of 2php per 100 declared value) New increase Starting Sept. 01,2018
125 (Metro Manila) + insurance
128 (Luzon) + insurance
107 (Visayas) + insurance
120 (Mindanao) + insurance

1 Pounder Pouch
153 (Metro Manila) + insurance
156 (Luzon) + insurance
130 (Visayas) + insurance
145 (Mindanao) + insurance

Schedule for sending parcels is M-W-F ONLY. Payments should be received in the morning of MWF if you want your item to be shipped on that scheduled day. As I leave by lunch to send out of town orders already. Otherwise, it would be on the next schedule date. Thanks!





blakicez
Complete ads list at goo.gl/VWNeyz