DFROBOT DFRDUINO FIO

Product Details
The DFRduino Funnel I/O (Fio) is a board based on the original design of Arduino FIO. It is 100% compatible with original Arduino FIO.

Funnel is a toolkit to sketch your idea physically, and consists of software libraries and hardware. By using Funnel, the user can interface to sensors and/or actuators with various programming languages such as ActionScript 3, Processing, and Ruby.

Arduino Fio is compatible with Funnel. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board. The Fio has been designed to be wirelessly reprogrammable. Checkout our tutorial on wireless bootloading!

Note: The miniUSB connector is used for battery charging only. To bootload new firmware, you will need an external serial connection over an FTDI Basic Breakout, cable, or other serial connection.

Note: The XBee socket and FTDI connection live on the same TX/RX pins of the ATmega328. You will need to remove the XBee module while reprogramming over serial. We recommend using a wireless bootloader whenever possible to avoid this step.


FEATURES
ATmega328V running at 8MHz
Arduino Bootloader
XBee socket
Lithium Polymer battery compatible
MAX1555 LiPo Charger
Reset button
On/Off Switch
Status/Charge/RSSI LEDs

SPECIFICATION
Size: 65x25x13 mm (2.6x1.0x0.5 in)
Weight: 10 gram