RAW 4X4 SHOCK AND COIL SPRING

NOTE
IFS Type: Php 10,500
Conventional Type: 8,500

RAW 4x4 are an Australian designed and developed range of heavy duty suspension equipment with the ultimate goal of surviving the world’s toughest of conditions.

Australia’s terrain is some of the most diverse and demanding in the world, which is why it is essential your 4x4 is equipped with the right suspension components.

RAW Nitro
Raw Nitro is an expanded body heavy duty gas shock absorber designed to improve body roll and increase vehicle stability.

Features include:

Large 35mm bore size
Low pressure nitrogen gas to eliminate shock absorber fade
Expanded body for extra oil capacity
Hi-temperature multi lip HNBR seal & oil
Re-coil cut off to avoid internal shock absorber damage from over extension
Hardened polished chrome rod.

RAW Nitro Max (Twin Tube)
As the big bore heavy duty shock absorber in the RAW 4x4 range, these shocks have been designed for heavy coil sprung and torsion bar vehicles by using proven truck shock absorber design with highly tuned valving designed for 4x4 applications. With a massive 70mm body and a nitrogen gas cell in the outer tube, RAW Nitro Max will significantly reduce shock absorber fade in the harshest conditions.

Features include:

Large 41mm bore size
Nitrogen gas cell to eliminate aeration inside the shock absorber
High temperature oil to maintain viscosity under hard working conditions
Multi lip Viton seal to retain oil at temperatures up to 240 degrees celsius
Polyurethane bushing
One piece eye rings & 360 degree welds on all fittings
Silicone dust boot

RAW Nitro Max (Mono Tube)
The Nitro Max mono tube strut has been designed for the modern 4WD vehicle with coil over shock absorber front suspension. A mono tube is best suited for this application for heat dissipation as these shock absorbers are usually short and operate on a small stroke. Using a large 46mm bore places less stress on the internal components of the shock absorber providing a controlled and comfortable ride.

Features include:

HNBR high temperature seal to retain oil
Large 46mm bore size
Nitrogen gas
High temperature oil to maintain viscosity under hard working conditions
Mono tube design for efficient heat dissipation
=======================================
For more details contact us:
ISLAND AUTOMOTIVE SOLUTIONS
Tel. No# 541 2697
Mobile: 0917 564 0692
Email: [email protected]

2838 Uruguay St. Makati City