ESP8266 WIFI SHIELD ESP-13 EXPANSION BOARD

ESP8266 WIFI Shield ESP-13 Expansion Board

This ESP8266 WIFI Shield ESP-13 Expansion Board has a voltage converter chip is used to deal with 3.5V (Esp8266) and 5V (Arduino). Dual DIP switches is used for serial ports so that this module shield can be used alone as an Arduino Uno expansion board, and also be used as ESP8266 expansion board. Serial data is transported to WiFi device transparently, and vice versa.

Features:

WiFi using industrial-grade chips ESP8266, modules for the ESP-13 with metal shield, anti-jamming
Real serial WiFi, Arduino program without any configuration
Based on WIFi Web Server configuration parameters and serial port parameters
It can be used as an independent ESP8266 development board

Technical Specification:

802.11 b / g / n wireless standards;
STA /AP modes support
TCP / IP protocol stack, One socket;
Supports standards TCP/UDP Server and Clients;
Supports serial port baud rate configuration
1200/2400/4800/9600/19200/38400/57600/74800/115200 bps;
Supports serial data bits: 5/6/7/8 bits;
Support serial parity: none;
Supports serial stop bits: 1/2 bit;
Pin-compatible with Arduino UNO, Mega;
Arduino Pinout 2/3/4/5/6/78/9/10/11/12/13;
ESP8266 GPIO Pinout 0/2/4/5/9/10/12/13/14/15/16/ ADC / EN / * UART TX / UARTX RX;
KEY button: modes configuration;
Dual-Ports DIP switches: switching Arduino and ESP8266;
WiFi operation current: continuous transmission operation:
?70mA (200m A MAX), idle mode: