ESP8266 WEB SEVER SERIAL WIFI EXPANSION SHIELD ESP-13 FOR ARDUINO UNO

For Pick-up or Delivery

Available for Free Shipping and Cash-on-Delivery NATIONWIDE

https://www.facebook.com/gizmopub

Features:
Wifi part adopts industrial level ESP8266 chip, the module carries ESP-13 metallic shield cover to realize strong anti-interference capacity.
The serial ports adopts dual channel dial switch to realize control, which enable this shield to work both as a shield for aduino UNO but also as ESP8266 shield.
The Wifi parameters and serial port parameters are configured according to Web Server
When work as independent ESP8266 board, it supports download official AT command firmware, NodeMCU open-source firmware.

Specification:
Support wireless 802.11 bgn standard
Support two STAAP working mode
Built-in TCPIP protocol stack, you could set up a socket.
Support standard TCPUDP Server and Client
Serial port baud rate support: 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps
Serial port date bit: 5678 bit; Serial port stop bit: 12 bit
Standard Aduino UNO, Mega pin spacing
Lead out Aduino Pin 2,3,4,5,6,7,8,9,10,11,12,13
Lead out ESP8266 GPIO 02459101213141516ADCENUART TXUART RX
Reset button; KEY button reuse configuration function
Two switch dial switch to realize switch between aduino and ESP8266 serial port shield
Wifi operating current: continous transmit: ?70mA (200mA MAX), standby: 200uA
Wireless transmit speed: 110-460800bps
Operating temp: -4°C~ +125°C

Package Content:
1x ESP8266 Web Sever Serial Wifi Expansion Shield ESP-13