09428111876
Bulacan City
Battery Charger,
We are one of the largest free online selling communities with thousands of active sellers.
Do you have something to sell? Your next sale might be just a few clicks away.
Based from 899 member feedbacks. We value your suggestions and use it.
Liitokala lii-500 is the worlds greatest charger! Unique!!!
It can quickly detect the 3.7 and 1.2 Battery capacity.
And with 1-1.5 USB 5 V output, adding 3.7 V lithium battery, you can give any 5 products.
With car charger, and functions.
Package Contents:
1 x lii-500 18650/26650 Charger
1x12 2A ADAPTE (US / EU)
1 x tracking number
Warning to Tajikistan
1. This device can only charge Cylindrical lithium-ion batteries and nickel-metal hydride batteries, rechargeable lithium iron phosphate battery;
2. Before use, please refer to the user manual carefully note the recommendations of the battery charging current does not exceed the recommended charging current;
3. Do not use any other power adapter;
4. Chargers discharge may be hot, be careful not to burn;
5. Stop using, turn off the power, remove the battery;
6. It can be used only in a normal room.
7. This product test data for reference only, please consult with a professional
Equipment.
Secondly, the characteristics of
1.4 kinds of charging current regulator (mA / 500mA / 700mA / 1000mA);
2. Various specifications (18650/26650 ...... / AA / AAA) into the battery charger;
3. The charger eliminates the use of a separate LCD screen, Voltage (V) Current (MA) time (H) Capacity (mAh) Resistance (MR) Options, E. .. View;
4. Under the charging mode, 4 channel work independently, you can select different charging current for charging and hunchong lithium-ion batteries and nickel-metal hydride battery.
5. Under the quick test mode, 4 channels can quickly detect the battery capacity, regardless of the lithium-ion batteries and nickel-hydrogen batteries, work independently. Rapid detection process of battery capacity (category 1, 2) two-step
6. Neither the test mode, battery capacity is usually three-step process of (1 first charged, then discharged 2 and 3 refill), battery capacity detection process;
. 7. Charging and fast test / test 3 modes can operate simultaneously; Independent set charge / fast detection capability / Normal capacity of detection;
8. Various protection functions: overload and over discharge, short circuit, temperature, voltage 0 the function is activated, (& Delta; V and 0 & Delta; V), 1.65 B 2.2 B can not be charged, Intelligent recognition and bad battery reverse-battery detection protection.
9. With the standard 5 / 1000mA USB output: January 4 lithium batteries Lithium batteries USB output is completed, the product can not be nickel-metal hydride battery with USB output.
10. With a special adapter Power Supply: DC Input voltage: 12V / 2A.
Thirdly, description of the keys
1. The charger has six buttons, key mode (mode), the current selection key (Nap), and view the data independently selected key (1234) The use of simple and convenient;
2. Hold down the Mode key in any case, and for 3 seconds to change the shipping fee (Free) mode, or a rapid test is not a test (capacity test) mode, then press again the corresponding function keys can be changed within 8 seconds, the current Independent, Hunchong, capacity test, the selected function after 8 seconds, in working condition, in working condition can press (1234) View the current (MA) / Capacity (mAh) / Voltage (V) / Time (H) / Resistance (MR) data reference.
Fourth, Mode Description:
(Charge mode)
1. At power Charger, Charger all instant full brightness LCD screen when the battery is placed in the display Null, if it is a bad battery will also be displayed in the Null;
2. Insert the battery charger, battery charger for three seconds or so measurements of the internal resistance of the battery, after which the system automatically switches to charging mode (FREE), the charger will automatically default to the charging current "500mA, in 8 seconds for the current selection key ( Nap) Select 300mA, 500mA, 700mA, 1000mA Charging current lock system that you select will be charged in eight seconds, if 8 seconds is not set, the system will automatically default to charging current 500MA, current and other functions at this time would not be changed if you want to change, change the election news;
3. In the charging mode (FREE) for 8 seconds to change any of independent charge or any other current selection, and various battery hunchong. Make a simple, 8 seconds, press the corresponding button battery 1234, press the MODE button to change the mode, press to changing current independent, Hunchong, detection capacity, chosen after 8 seconds of operation, attention to choose the size according to the current battery capacity If not faster charging we recommend charging 500MA, This is the safest;
4. Charging Mode by pressing the keys, you can switch to view the 1234 charge capacity (mAh) / charging time (H) / internal resistance of the battery (MR) / charging current (MA), Voltage (V) 5 kinds of units, the battery is fully charged after the show (free);
II. Capacity detection mode (Quick quiz or test) of two types
() Quick test (rapid capacity test mode)
1. When the power is turned back into the charger, 8 seconds Touch (Key Mode Mode) Select (quick test quick capacity test mode), then press the (current selection key CURREN) Select System 8 seconds after the lock range of work. Quick reference table capacity test procedure
Quick test enter selected discharge current charge batarei-
The first battery is low, then the battery is fully charged the batteries, to detect and record the capacity of the battery.
Please note that this product is the test power mode, the discharge mode is divided into two types, When you select the charge current (300mA, 500mA), The system will automatically default discharge current of 250mA, When you select the charge current (700mA, 1000mA), system automatically default discharge current is 500MA,
(B) or test (Normal capacity detection mode)
1. No test mode: The first battery is fully charged and then discharge the battery discharge to detect and record the capacity of the battery after the battery is fully automated; The ability to detect a process referred to in Table II
No test is selected, enter the current battery and recharge razgruzki-
2. When the power is turned back into the charger, 8 seconds Touch (Key Mode Mode) No test mode is selected, in any mode, press the Mode button for 2 seconds, you can enter the test mode;
3. Once you enter any test mode, you can select the key (Nap) Select 300mA, 500mA, 700mA for 8 seconds, or 1000 mA current, the current system is locked after selecting 8 seconds if the 8 second, do not set system It will automatically lock mA charge current (current when the default charging current is automatically selected when the discharge current of 250 mA discharge), which for 8 seconds, select 700mA or 1000mA current will automatically select the discharge current of 500mA discharge.
4. When the battery is fully charged, the system will automatically discharge, discharge current, system default (relationships, select the charging current), and writing data to detect the discharge capacity of the battery, when is displayed, the power of the test mode, this parameter LCD display the actual battery capacity.
5. The capacity of the test mode, the Charger will be selected on the current settings again before charging the battery fully.
Five, USB 5 V output
5.1 USB 5V only move as an output, the output current of 1000mA, USB output power connection VOID.
5.2 when the battery slot exports and USB / 5V to wake up, is now ready to 5 V power supply and electronic products.
4x5.3, USB slot exit can be recommended two slots in the battery.
5.4 USB 5 V output is only 3.7 V lithium-efficient NiMH Boost invalid.
VI. Specific parameters
6.1 DC Input voltage: 12V / 2.0A
6.2 LI-ION battery charging current: 4.2 V 300mA / 500mA / 700mA / 1000mA
6.3 NiMH battery charging current: 1.48 mA / 500mA / 700mA / 1000mA
6.4 Rechargeable Battery Specifications: 18650.26650, 14500, AA, AAA, and others.
6.5 Discharge Current: 250mA, 500mA
6.6 USB Output: 5V --- 1000mA
6.7 Termination: Intelligent voltage monitoring
6.8 Size: 162 mm (length) * 96 mm (width) * 36 mm (height).
I can meet up within Baliuag Bulacan area or shipping thru LBC to buyer expense.
This seller has been a member since: Jul. 13, 2016
Member Location:
Total Classifieds: 8
Why seller feedback is important?
Transact with most credible & reputable sellers
Know the seller you are going to deal with
Claim warranty long after purchasing the item
Warn you and other buyers against scams
Motivates sellers to provide good service