PHP 250.00 4-CHANNEL OPTO-ISOLATOR IC MODULE ARDUINO HIGH AND LOW LEVEL

4-Channel Opto-isolator IC Module Arduino High and Low level Expansion Board

Description:
This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the high-power system by use of an opto-isolator IC.
This IC has four LEDs and four photodiodes built-in.
This allows the low-voltage side to control a high voltage side
We often use this board to allow a microcontroller control servos
or other motors that use a higher voltage than the TTL logic on the (3.3V or 5V) micro,
and may cause electromagnetic interferance with our system as the motors turn on and off.
This board will isolate the systems, creating a type of electrical noise barrier between devices
This breakout board uses the TLP281 optoisolator and discrete transistors to correct the logic.
Comes with four channels.
Great for use in noisy circuits where signal lines require electrical isolation
A normal LED opto-isolator will invert the logic of a signal.
We threw some transistors on this compact board to correct the inversion.
What you put into the IN pins, will be *******ted on the the OUT pins, but at the higher voltage (HV)


Features:

Use of low level control high level.
Such as the use of single chip microcomputer 3V or 5V voltage 9V or 12V voltage control
HVCC maximum not more than 24V.
Outlet OUT1 / OUT2 / OUT3 / OUT4 output current is equal to the largest HVCC / 5.1K,
maximum absorption current 500mA
Input: IN1 / IN2 / IN3 / IN4, SCM or Arduino IO port,
GND with single-chip microcomputer or Arduino board GND connection.
IN1 / IN2 / IN3 / IN4 respectively control the OUT1 / OUT2 / OUT3 / OUT4
Output: OUT1 / OUT2 / OUT3 / OUT4
Output: HVCC: Connection is control of high voltage anode,
HGND connection is control of high voltage anode
PCB Size: 25*24mm/0.98*0.94


Package Included:
1 x 4-Channel Opto-isolator IC Module Arduino High and Low level Expansion Board


4 channel , opto , opto isolator , opto-isolator , opto isolator module , 4-channel , channel ,





SERIOUS BUYERS ONLY PLEASE

Contact number: 09333-888-611

Do payment first before your item would be shipped on that schedule date. No COD option.

Mode of payment is either thru GCASH, BPI, LBC or PALAWAN Express, PAYPAL(+4.5%+15), Cash for meetups.

Provincial buyers, you pay for the added shipping cost:

Via LBC: Starting Oct 1,2017 LBC rates up (till 1 Kilo weight)
155.00 (Metro Cebu)
190.00 (Visayas)
190.00 (Metro Manila)
205.00 (Luzon/Mindanao)
+ 5php insurance for every 500 declared value.

Via JRS: Letter pouch till 100 grams
99.00 (Visayas)
114.00 (Luzon/Mindanao)

Schedule for sending parcels is M-W-F ONLY. Payments should be received in the morning of MWF if you want your item to be shipped on that scheduled day. As I leave by lunch to send out of town orders already. Otherwise, it would be on the next schedule date. Thanks!





blakicez
Complete ads list at goo.gl/VWNeyz